Experimental and MD simulation study on the physical and mechanical properties of organically modified montmorillonite clay and compatibilized linear low density polyethylene nanocomposites

Understanding the interfacial interactions plays a key role in controlling mechanical and physical properties of polymer/clay nanocomposites (PCNs). In this work, the surface interactions between constituents of experimentally prepared PCNs which are the pristine linear low density polyethylene (PE) chains, PE compatibilizers, montmorillonite clay surface layer, and surfactants were studied quantitatively by employing molecular dynamics simulation technique. The interaction energy between the polymer and the clay was found to be inversely proportional with the volume of the surfactant which decreases the electrostatic interactions between the compatibilizer and the hydrophilic clay surface. However, the van der Waals (vdW) interactions between alkyl tails of surfactants and the PE chains increase with the tail length of the surfactants. The most attractive interaction was between the surfactant's head group and the clay surface. We showed that there existed fine balance between the electrostatic and vdW type forces on the stability and the enhanced properties of the PE–organoclay nanocomposites. Calculated interaction energies were then correlated to the experimentally measured mechanical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45817.     

Poly(hydroxyethyl methacrylate) based magnetic nanoparticles for plasmid DNA purification from Escherichia coli lysate

The aim of this study is to prepare poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-histidine) [PHEMAH] magnetic nanoparticles for plasmid DNA (pDNA) purification from Escherichia coli (E. coli) cell lysate. Magnetic nanoparticles were produced by surfactant free emulsion polymerization. mPHEMAH nanoparticles were characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), vibrating sample magnetometer (VSM), electron spin resonance (ESR), thermogravimetric analyses (TGA) and transmission electron microscopy (TEM). Surface area, average particle size and size distribution were also performed. Specific surface area of the mPHEMAH nanoparticles was found to be 1180 m²/g. Elemental analysis of MAH for nitrogen was estimated as 0.18 mmol/g polymer. The amount of pDNA adsorbed onto the mPHEMAH nanoparticles first increased and then reached a saturation value at around 1.0 mg/mL of pDNA concentration. Compared with the mPHEMA nanoparticles (50 μg/g polymer), the pDNA adsorption capacity of the mPHEMAH nanoparticles (154 mg/g polymer) was improved significantly due to the MAH incorporation into the polymeric matrix. The maximum pDNA adsorption was achieved at 25 °C. The overall recovery of pDNA was calculated as 92%. The mPHEMAH nanoparticles could be used six times without decreasing the pDNA adsorption capacity significantly. The results indicate that the PHEMAH nanoparticles promise high selectivity for pDNA.     

Macroscopic assembly of indefinitely long and parallel nanowires into large area photodetection circuitry

Integration of nanowires into functional devices with high yields and good reliability turned out to be a lot more challenging and proved to be a critical issue obstructing the wide application of nanowire-based devices and exploitation of their technical promises. Here we demonstrate a relatively easy macrofabrication of a nanowire-based imaging circuitry using a recently developed nanofabrication technique. Extremely long and polymer encapsulated semiconducting nanowire arrays, mass-produced using the iterative thermal drawing, facilitate the integration process; we manually aligned the fibers containing selenium nanowires over a lithographically defined circuitry. Controlled etching of the encapsulating polymer revealed a monolayer of nanowires aligned over an area of 1 cm(2) containing a 10 × 10 pixel array. Each light-sensitive pixel is formed by the contacting hundreds of parallel photoconductive nanowires between two electrodes. Using the pixel array, alphabetic characters were identified by the circuitry to demonstrate its imaging capacity. This new approach makes it possible to devise extremely large nanowire devices on planar, flexible, or curved substrates with diverse functionalities such as thermal sensors, phase change memory, and artificial skin.     

Dynamic response of a circular plate to a moving load

An analytical series solution for the dynamic response of a circular, thin, isotropic plate under a moving singular load is given. The mass of the agent applying the force is ignored. The response of the plate is computed in two example cases, to illustrate the solution, including the force moving on a straight line through the plate, and also for a load moving on a circular trajectory on the plate.     

Effects of Growth Rates and Compositions on Dendrite Arm Spacings in Directionally Solidified Al-Zn Alloys

Dendritic spacing can affect microsegregation profiles and also the formation of secondary phases within interdendritic regions, which influences the mechanical properties of cast structures. To understand dendritic spacings, it is important to understand the effects of growth rate and composition on primary dendrite arm spacing (λ ₁) and secondary dendrite arm spacing (λ ₂). In this study, aluminum alloys with concentrations of (1, 3, and 5 wt pct) Zn were directionally solidified upwards using a Bridgman-type directional solidification apparatus under a constant temperature gradient (10.3 K/mm), resulting in a wide range of growth rates (8.3–165.0 μm/s). Microstructural parameters, λ ₁ and λ ₂ were measured and expressed as functions of growth rate and composition using a linear regression analysis method. The values of λ ₁ and λ ₂ decreased with increasing growth rates. However, the values of λ ₁ increased with increasing concentration of Zn in the Al-Zn alloy, but the values of λ ₂ decreased systematically with an increased Zn concentration. In addition, a transition from a cellular to a dendritic structure was observed at a relatively low growth rate (16.5 μm/s) in this study of binary alloys. The experimental results were compared with predictive theoretical models as well as experimental works for dendritic spacing.     

Chromium(VI) Adsorption by Brown Coals

The ability of brown coals (leonardites) to remove chromium(VI) from aqueous solutions was studied as a function of pH, contact time, adsorbent nature, and concentration of metal solutions. The adsorption of Cr(VI) was higher between pH 2.0 and 3.0 for all brown coals and maximum sorption was observed at pH 3.0. The Langmuir adsorption isotherm was used to describe observed sorption phenomena, and the constants were evaluated. The maximum adsorption capacity of 0.92 mmol of Cr(VI)/g for YK, 0.98 mmol of Cr(VI)/g for KK was found from experimental data. KK was the best among the selected adsorbents for the sorption of Cr(VI) at pH 3 and the sorption was 81% out of 100 ppm Cr(VI) after 120 min of stirring.     

Control of Particle Characteristics in the Production of Fine Powder by Grinding

ABSTRACT

The development of improved methods of grinding and separation of fine particles is becoming increasingly important in a wide variety of industries. The requirements on the powder production differ widely, and depend on both the material and the specific application. This paper describes the effects of a variety of parameters on the production of fine powder by dry grinding; these parameters include particle agglomeration, the classification method employed, and air moisture in the mill. It is also demonstrated that particle shape is affected by the type of machine, by the specific breakage mechanism in a grinding device, and by the time spent in the grinding environment.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Structural coloring in large scale core-shell nanowires

We demonstrated two complementary size-dependent structural coloring mechanisms, interference and scattering, in indefinitely long core-shell nanowire arrays. The unusual nanostructures are comprised of an amorphous semiconducting core and a polymer shell layer with disparate refractive indices but with similar thermomechanical properties. Core-shell nanowires are mass produced from a macroscopic semiconductor rod by using a new top-to-bottom fabrication approach based on thermal size reduction. Nanostructures with diameters from 30 to 200 nm result in coloration that spans the whole visible spectrum via resonant Mie scattering. Nanoshell coloration based on thin film interference is proposed as a structural coloration mechanism which becomes dominant for nanowires having 700-1200 nm diameter. Controlled color generation in any part of visible and infrared spectral regions can be achieved by the simple scaling down procedure. Spectral color generation in mass-produced uniform core-shell nanowire arrays paves the way for applications such as spectral authentication at nanoscale, light-scattering ingredients in paints and cosmetics, large-area devices, and infrared shielding.     

Self-esteem development from age 14 to 30 years: A longitudinal study.

We examined the development of self-esteem in adolescence and young adulthood. Data came from the Young Adults section of the National Longitudinal Survey of Youth, which includes 8 assessments across a 14-year period of a national probability sample of 7,100 individuals age 14 to 30 years. Latent growth curve analyses indicated that self-esteem increases during adolescence and continues to increase more slowly in young adulthood. Women and men did not differ in their self-esteem trajectories. In adolescence, Hispanics had lower self-esteem than Blacks and Whites, but the self-esteem of Hispanics subsequently increased more strongly, so that at age 30 Blacks and Hispanics had higher self-esteem than Whites. At each age, emotionally stable, extraverted, and conscientious individuals experienced higher self-esteem than emotionally unstable, introverted, and less conscientious individuals. Moreover, at each age, high sense of mastery, low risk taking, and better health predicted higher self-esteem. Finally, the results suggest that normative increase in sense of mastery accounts for a large proportion of the normative increase in self-esteem. (PsycINFO Database Record (c) 2011 APA, all rights reserved)